Large Buffing Tree Mandrel

This large buffing tree mandrel is available separately or come as part of the Buffing Wheel Kit. It should be used with the Chestnut Buffing Tree.

The mandrel is made in the UK and are zinc plated for maximum protection. Due to the limitations of plating a blind hole, care should be taken to ensure the tapped thread of the large mandrel stays as dry as possible.

The large mandrel is designed to be held in a lathe chuck. It is 25mm in diameter at its widest part, stepped to 18mm with an undercut for smaller chucks. It can be held on either, both will still give plenty of clearance from the chuck.

Length: 120mm

Diameter: 18mm and 25mm

Construction: Mild Steel, Zinc Plated

Tapped thread: M8